3dprint.nih.gov

NIH 3D Print Exchange

COVID-19 Supply Chain Response. Visit our special collection supporting the medical supply chain during the COVID-19 public health emergency.

Actived: 4 days ago

URL: https://3dprint.nih.gov/

Discover 3D Models

(2 days ago) Click here to see designs for PPE and devices in support of the COVID-19 public health emergency. Displaying 48 of 10509 results. Show 48 | 72 | 150 results per page.

Category:  Health And Life Go Coupon

COVID-19 Response

(3 days ago) This collection represents a coordinated effort among the NIH/NIAID, FDA, VA, and America Makes to support the manufacturing of personal protective equipment (PPE) or other necessary medical devices that are in short supply due to the COVID-19 pandemic.

Category:  Health And Life Go Coupon

COVID-19 Response Essential Information NIH 3D Print

(8 days ago) This collection is intended to support innovation and informed decision-making during the COVID-19 pandemic, while critical safety and medical equipment are unavailable through traditional supply chains.

Category:  Health And Life Go Coupon

NIH 3D Print Exchange A collection of biomedical 3D

(8 days ago) These are not intended for use by health care professionals in a health care setting. These may or may not meet fluid barrier or filtration efficiency levels. A surgical mask is a loose-fitting, disposable device that creates a physical barrier between the mouth and nose of the wearer and potential contaminants in the immediate environment

Category:  Health And Life Go Coupon

3D Prints in Medicine NIH 3D Print Exchange

(8 days ago) 3D Prints in Medicine. From surgical implants and prosthetics, 3D printing technology is transforming the field of medicine, allowing doctors to create customized, patient-specific implants.

Category:  Health And Life Go Coupon

Nasal Swab Protocols NIH 3D Print Exchange

(5 days ago) The Veterans Health Administration (VHA) is evaluating the safety and functionality of a variety of 3D-printable NP swab designs for use in acquiring samples for COVID-19 diagnostic tests. Testing protocols developed by the VHA can be downloaded from links in the table below, along with results from independent testing generously provided by

Category:  Health And Life Go Coupon

Supplemental COVID Face Shield

(9 days ago) Department of Health and Human Services (HHS), including any renewals made by the HHS Secretary in accordance with section 319(a)(2) of the Public Health Service Act (PHS Act)”. The policy recommends to use an approved disinfection agent as it should “minimize the viability of

Category:  Health And Life Go Coupon

IC3D Budmen Face Shield NIH 3D Print Exchange

(4 days ago) The following refers to: 3DPX-013309. The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff."

Category:  Food,  Coronavirus Go Coupon

"CEG Extreme" COVID19 Mask Frame for Halyard H600 NIH 3D

(4 days ago) "This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

3DPI Filtering Half Mask NIH 3D Print Exchange

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

PNWS

(4 days ago) This is an update of "DtM-v3.1 Face Shield PPE, 3D printable headband NO LOGO", item 3DPX-013359. Updates made based on clinical feedback are:

Category:  Health And Life Go Coupon

Activated Charcoal Mask with Flexible Filter Options NIH

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

Helmet-Compatible Community Face Mask

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

LRTee: Ventilator Splitter NIH 3D Print Exchange

(4 days ago) Patients with COVID-19 in serious or critical condition often require assisted breathing via ventilator. As the number of patients in need of ventilators grows (exponentially in many densely populated regions), there are not adequate numbers of ventilators to support the high number of patients.

Category:  Health And Life Go Coupon

Covid-19 Scuba Mask Snorkel-HME filter adapter NIH 3D

(4 days ago) We emphasize that this device has not been assessed for its comparative efficacy to prevent nosocomial infection in health care workers compared with the standard-of-care, the N-95 mask. We conducted only a limited proof-of-concept fit testing in a non-clinical environment to assess the device for its effect on work-of-breathing, CO2 retention

Category:  Health And Life Go Coupon

3d Mask

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

Surgical Mask Strap Full cut NIH 3D Print Exchange

(4 days ago) Removed additional material and flattened it. reduced print time by ~6 minutes on the full cut version. Prints in ~14 minutes. The center cut remix you might be able to stack print them as the ridges are removed.

Category:  Health And Life Go Coupon

Robins SPARK community mask v2 NIH 3D Print Exchange

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

Surgical Mask Tension Release Band with 35mm extension

(4 days ago) National Institutes of Health . . . Turning Discovery Into Health

Category:  Health And Life Go Coupon

DtM-v4.0 Face Shield PPE, Design for Injection Molding

(4 days ago) For access the full, open source, turnkey face shield design package from Design that Matters and Spark Health Design including updated, open source, editable instructions for use, and advice on labeling, packaging, regulatory, and quality systems to enable new manufacturers to quickly scale face shield production, see the DtM-v4 Turnkey

Category:  Health And Life Go Coupon

PPE NIH 3D Print Exchange

(4 days ago) National Institutes of Health . . . Turning Discovery Into Health

Category:  Health And Life Go Coupon

All 3DPX Builds

(7 days ago) National Institutes of Health . . . Turning Discovery Into Health

Category:  Health And Life Go Coupon

Reusable 3D Printed Replacement Straps for N95 Face Masks

(4 days ago) To resolve this problem, Sarah Flora of Geisinger Health System has designed a temporary solution—3D printed clips and straps. 3D PRINTED PARTS REQUIRED PER MASK. Print with Nylon 3D Printer Filament. 2 x Merged Straps; 2 x Straight Straps Straight Straps are extensions and might not be needed for everyone. Print with Tough PLA 3D Printer

Category:  Health And Life Go Coupon

3DVerkstan 3D printed face shield head band NIH 3D Print

(4 days ago) The following refers to: 3DPX-013306. The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff."

Category:  Food,  Coronavirus Go Coupon

Prusa Face Shield NIH 3D Print Exchange

(4 days ago) We designed a comfortable and well-fitting face shield in response to the need for PPE devices created by the Covid-19 pandemic. Our device has been approved for clinical use by the Czech Ministry of Health and is being used around the world.

Category:  Health And Life Go Coupon

Surgical Mask Ear Saver NIH 3D Print Exchange

(4 days ago) Surgical masks are now worn the entire day by health care professionals and others. The straps typically wrap behind each ear. After wearing these for several days, the skin behind the ear starts to break down. This ear-saver design takes pressure away from the ears.

Category:  Health And Life Go Coupon

SARS-CoV-2 Spike S Protein and ACE2 (PathogenAR) NIH 3D

(4 days ago) This model includes SARS-CoV-2 Spike S Protein (open state) and ACE2 (PathogenAR). This model was not originally intended for 3D Printing, so try at your own risk.

Category:  Protein Go Coupon

Essentium

(2 days ago) National Institutes of Health . . . Turning Discovery Into Health

Category:  Health And Life Go Coupon

Pelvis Bone Set, Adult Female, Anatomical, Whole

(4 days ago) Uniformed Services University of the Health Sciences. How to Make. Printer Technology/Material . Polylactic Acid (PLA) Printer Make/Model . Creality CR-10 (Any Printer will work) Print Units . mm. Pre- and Postprocessing Instructions . Can coat 3D prints with clear, high-impact resin after printing to minimize layer lines.

Category:  Acid Go Coupon

Tyvek soft facemask with minimal and reusable parts. NIH

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

FlexFit Face Mask NIH 3D Print Exchange

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

Collection: Heart Library NIH 3D Print Exchange

(9 days ago) Welcome to the 3D Heart Library, a collection of digital reproductions of human anatomic hearts, with a specific area of interest in congenital heart disease.

Category:  Heart Go Coupon

Anchored Tsunami Ear Saver NIH 3D Print Exchange

(4 days ago) Overview. The Anchored Tsunami Ear Saver is a remix of the original Tsunami Ear Saver design. It includes brush-like extensions to keep the device in place in for users with long hair.

Category:  Health And Life Go Coupon

Skull and plate ready to print NIH 3D Print Exchange

(4 days ago) This is a model of a skull with a defect and a customized implant, ready to print, for educational purposes.

Category:  Health And Life Go Coupon

Fluid-Filled Vestibular Apparatus for Vertigo Education

(4 days ago) Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model.

Category:  Health And Life Go Coupon

OpenHumerus IO Access Trainer

(4 days ago) This is the Humeral Head version of the OpenTibia model I created. It is an open-source 3d printed training device for humeral head IO access.

Category:  Health And Life Go Coupon

HensNest v2 NIH 3D Print Exchange

(4 days ago) This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B.

Category:  Coronavirus Go Coupon

CRYSTAL STRUCTURE OF HUMAN ADIPONECTIN RECEPTOR 2 IN

(4 days ago) crystal structure of human adiponectin receptor 2 in complex with a c18 free fatty acid at 3.0 angstrom resolution

Category:  Acid Go Coupon

Cyborg Beast (Original Design) NIH 3D Print Exchange

(4 days ago) The Cyborg Beast prosthetic hand and the proposed distance-fitting procedures may represent a possible low-cost alternative for children in developing countries and those who have limited access to health care providers.

Category:  Health And Life Go Coupon

Mohs Micrographic Surgery, Consent Model NIH 3D Print

(4 days ago) This is a 6 piece model used in the consent of patients prior to Mohs micrographic surgery. This model has been previously used in the clinical setting as part of a quality improvement project at University Hospitals Department of Dermatology.

Category:  Health And Life Go Coupon

SLA High throughput Formlabs 1/1+ NIH 3D Print Exchange

(4 days ago) National Institutes of Health . . . Turning Discovery Into Health

Category:  Health And Life Go Coupon

Disposable cell phone stethoscope attachment for

(4 days ago) Being 3-D printed, it's readily reproducible design makes it easy to eliminate any infectious risk to patient or clinician. This tele-stethoscope is particularly timely given the current clinical landscape but will also hold utility beyond the immediate health-care Covid-19 crisis.

Category:  Health And Life Go Coupon

Replistruder 3 Syringe-Based Extruder for 3D Bioprinting

(4 days ago) These are the STL files for the Replistruder 3, syring-based extruder used to modify a desktop thermoplastic 3D printer into a 3D bioprinter capable of 3D printing hydrogels using a syringe.

Category:  Health And Life Go Coupon

Outbreak

(9 days ago) This page is currently under construction. Please contact us for support and more information.. The National Museum of Natural History’s Outbreak: Epidemics in a Connected World Do-It-Yourself (print-on-demand) exhibit includes a suite of graphic panels, customizable templates, a community resource guide, and, multimedia, including digital interactives, that hosting organizations can deploy

Category:  Health And Life Go Coupon

SARS-CoV-2 Open Spike (S-Protein) NIH 3D Print Exchange

(4 days ago) National Institutes of Health . . . Turning Discovery Into Health

Category:  Health And Life Go Coupon

Face Shield

(4 days ago) The following refers to: 3DPX-013883 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the COVID-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration …

Category:  Food,  Coronavirus Go Coupon

Georgia Tech Face Shield for Injection Molding, 3D

(4 days ago) The following refers to: 3DPX-013314 The FDA has authorized production of protective face shields outside of the normal clearance pathway during the Covid-19 pandemic, based on Part 5, section D of the “Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency Guidance for Industry and Food and Drug Administration Staff."

Category:  Food,  Coronavirus Go Coupon